Sitemap  
 OneStopClick
  

Home
Services
Research
News
Supplier Directory
Tools
Events
About
Contact Us
         Home > Services > MPLS > MPLS Layer 2 VPLS + Login        
 MPLS Layer 2 Point-to-Point
 MPLS Layer 3 IPVPN
 MPLS Layer 2 VPLS

MPLS Layer 2 VPLS

 

Virtual Private LAN services are growing in popularity for delivering Ethernet services. They combine MPLS and Ethernet allowing both customers and carriers to benefit. For over two decades, Ethernet switching has dominated the local area network while IP routing has dominated the carrier network. IP backbones have been used to provide Internet access and more recently to provide IP VPN access. Corporate VPN services have been typically provided with existing TDM, ATM and Frame Relay Networks. During this period, Ethernet has continued to scale the bandwidth spectrum and with its simplicity and cost effectiveness, it has established itself as the infrastructure of choice in the metro and the WAN. (Resource: vpls.org executive overview).

Otherwise known as transparent Ethernet services, VPLS is a newer protocol that works over MPLS and gives customers a combination of the benefits of the two above network types, i.e. the ability to operate a multipoint network AND pass all traffic at Layer 2 over the WAN. VPLS is popular in cities, such as Hong Kong & London & New York, where metro Ethernet networks have already been deployed. Due to its simplicity, robustness and ability to scale traffic to 10 Gbps, VPLS is popular with TV broadcasters, the financial sector and media houses.

 

Advantages of MPLS Layer 2 VPLS

Transparent interface - no router hardware investment required for bandwidth upgrades required
Layer 2 means that traffic is tagged by MAC address as opposed to IP address
Low latency - switched as opposed to routed
Plug & Play for ease of deployment: no configuration required for new sites which appear like new devices on a LAN.
Closed user groups can be established between customers for collaborative working
QOS/COS costs - Layer 3 IP/VPN carriers charge an on-going fee for higher priority traffic, whereas VPLS providers only charge a one-off set-up fee to configure all levels of prioritisation.

Disadvantages of MPLS Layer 2 VPLS


       VPLS has not yet been rolled out globally therefore the “any to any” feature of Layer 3 IP/VPNs is not yet    fully functional with one provider.
 
 
 
 
 
 
 
Print Print Email this page Email this page Link to this Link to this AddThis Social Bookmark Button
The value to me was OneStopClick's quick identification of the player's in the market who we should be talking to. The introductions were well received and I liked the market intelligence on each vendor. Highly recommended.

Robert de Corday Long
Qicomm
 
         Home > Services > MPLS > MPLS Layer 2 VPLS
  

 
Topics
 
Site Sections
Services   |   Research   |   Technology Directory   |   About   |   Contact Us 
 
Most Popular
Leased Line   |    MPLS   |   Colocation   |  Latest News Headlines  |   Speed Test   |   What is RSS?  What is RSS?

 


Your use of this website constitutes acceptance of the OneStopClick  Privacy Policy, User Agreement  &  Copyright  2008